ShopVSC

The IOGEAR Wireless USB to VGA Adapter instantly allows you to connect your PC to a high resolution display wirelessly using Wireless USB technology. Simply install the driver software to your PC, connect the VGA adapter to your TV, projector, or any VGA monitor, then pair the display with your Wireless USB enabled PC (your PC must be enabled with the IOGEAR Wireless USB Adapter, model #GUWA200- sold separately, or have Wireless USB built-in). Now you are ready to extend your desktop to another screen wirelessly.

Additional Information:

• Operating System Support Microsoft XP 32-bit; Microsoft Vista 32/64-bit
• PHY Data Rate 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps
• Operating Range Up to 30 feet (10 meters)
• Frequency 3.1GHz to 4.8GHz (WiMedia Band Group 1)
• Number of Channel 7 channels (3 FFI + 4 TFI)
• RF Modulation Type QPSK/DCM
• Interface VGA
• Video Resolution Up to UXGA (1600x1200) or WSXGA+ (1680x1050)
• Video Streaming Up to 720p (720p only available at resolution 1280x720 or lower)
• Screen Mode Extended and Mirror mode
• Color Depth 32-bit True Color
• Data Rate PHY Rate 480 Mbps
• USB Specification Certified Wireless USB 1.0; USB 2.0
• Connectors
• USB mini-B connector used for cable association in wireless mode, and used for wired operation in wired mode
• Video Output VGA connector
• Security Highly Secured Wireless Connection (AES 128 bits)
• Association Mode Pre-Association and Cable Association; Stores up to 16 Associated Hosts
• Native Mode For playback of high resolution video
• Antenna Type Omni directional
• Reset Switch Used for erasing association history by pressing and holding this button for 10 seconds
• LEDs
• ACT (Activity) Blinking when data is being transferred
• Host Status Showing Association & Connection status
• Power On Solid when power is applied
• Power Consumption 3.3W
• Max Output Power -41.3 dBm/MHz
• Power Adapter 5V, 2A; 100-240VAC